|
|
|
Main |
Primary Range |
Secondary Range |
Special Application Models
|
 Secondary Range Sparking Arrestors |
|
Features |
* Designed to clamp onto existing exhaust systems
* For temporary or permanent installations
* Efficient single centrifuge design
* Low back pressure
* Can be mounted vertically or horizontally
* Compact size
* Maintenance free
* Stainless steel versions are ATEX approved
|
|
Details/Specifications |
|
Engine |
Power Range |
A |
B |
C |
D |
E |
Weight |
Material |
Part No |
|
HP |
KW |
mm |
mm |
Inlet Pipe Sizes (inches) |
mm |
mm |
kg |
Steel Type |
(add dimension *XXX) |
|
5-25 |
4-20 |
320 |
160 |
1-25-1.75 |
92 |
1.5 |
1.5 |
mild steel |
TGS 1L 92 *XXX |
|
5-25 |
4-20 |
320 |
160 |
1-25-1.75 |
92 |
1.5 |
1.5 |
stainless steel |
TGS 1L 92S *XXX |
|
20-45 |
15-34 |
335 |
160 |
1-50-2.25 |
125 |
1.5 |
2.0 |
mild steel |
TGS 1L 125 *XXX |
|
20-45 |
15-34 |
335 |
160 |
1-50-2.25 |
125 |
1.5 |
2.0 |
stainless steel |
TGS 1L 125S *XXX |
|
30-60 |
24-45 |
365 |
182 |
1-75-2.50 |
152 |
1.75 |
2.4 |
mild steel |
TGS 1L 152 *XXX |
|
30-60 |
24-45 |
365 |
182 |
1-75-2.50 |
152 |
1.75 |
2.4 |
stainless steel |
TGS 1L 152S *XXX |
|
40-100 |
30-75 |
380 |
175 |
2-00-3.00 |
205 |
2.5 |
3.5 |
mild steel |
TGS 1L 205 *XXX |
|
40-100 |
30-75 |
380 |
175 |
2-00-3.00 |
205 |
2.5 |
3.5 |
stainless steel |
TGS 1L 205S *XXX |
|
75-150 |
55-110 |
430 |
200 |
2-00-3.00 |
235 |
3.0 |
4.5 |
mild steel |
TGS 1L 235 *XXX |
|
75-150 |
55-110 |
430 |
200 |
2-00-3.00 |
235 |
3.0 |
4.5 |
stainless steel |
TGS 1L 235S *XXX |
|
0-10 |
0-7.5 |
238 |
100 |
1-00-1.50 |
150 |
|
0.7 |
mild steel |
TGL 150 *XXX |
| |
| Note: |
- When ordering a Western Tydens Spark Arrestor please
substitute the XXX at the end of the part number for the
dimension of the inlet pipe (C) you require e.g. TGS 1L
92
XXX with a 1.25 inch pipe would be TGS 1L 92 1.25
- We manufacture Spark Arresters in standard inlet
pipe sizes listed as follows:
1.0" (26mm) 1.25" (32mm) 1.50"
(36mm) 1.75" (45mm) 2.00" (51mm) 2.25"
(57mm) 2.50" (64mm) 2.75" (70mm) 3.00"
(77mm) 3.5" (89mm) 4.0" (102mm)
Alternative Outlet
All Spark Arresters can be supplied witha 90
degree bend on the output pipe. If this is required
please add /90 to the end on the part number e.g. TGS 1L
92 1.25/90
- If you would like to discuss you requirements in
detail prior to ordering one of the products listed or
would like technical advice then please do not hesitate
to contact us. N.B. we can also supply fitting
accessories and pipework.
|
